Filter By...
Learn to Carry Out Safe and Accurate Face Fit Tests
Gain a clear understanding of how to conduct and record face fit tests to ensure the correct function of respiratory protective equipment (RPE). This IIRSM-approved online face fit testing training course provides details of RPE types and examines face fit testing procedures. It includes a walkthrough of how to conduct a face fit test, making the course appropriate for new face fit testers who require knowledge of the process, as well as experienced testers who would like to review the steps.
The Face Fit Testing course comes with a free e-Checklist to guide you through face fit tests while automatically recording them.
About the Course
This Face Fit Testing course is designed for those required to conduct face fit tests on-site. It provides a comprehensive walkthrough of the face fit testing process, equipping participants to conduct fit testing correctly and ensure workers are protected from harmful airborne contaminants. Testing equipment this way is a legal obligation.
Why is Face Fit Testing Important?
Accidental exposure to airborne contaminants can lead to severe or fatal respiratory conditions, including asthma, pneumonia, chronic obstructive pulmonary disease (COPD) and lung cancer.
RPE is an essential safeguard for any employee at risk of exposure to airborne contaminants. However, it cannot do the job it was meant to do unless it fits properly. Every person is unique with unique facial features so testing that the equipment suits the user is fundamental.
Our comprehensive face fit tester training course addresses this critical need by providing responsible persons with the knowledge and skills to conduct proper RPE face fit testing. Participants learn step-by-step qualitative face fit testing procedures, ensuring worker safety and regulatory compliance. This helps contribute to a safer workplace and mitigate the risks associated with airborne contaminants.
Are You Aware of Your Responsibilities?
As an employer, you must protect your employees from workplace hazards. This includes ensuring that RPE is adequately fitted and effective.
Key legislation you need to be aware of includes:
- Provision and Use of Work Equipment Regulations (PUWER)
- Health and Safety at Work Act
- Control of Substances Hazardous to Health (COSHH)
- Construction (Design and Management) Regulations (CDM)
- Health and Social Care Act
- Conformity Marking Legislation
- Control of Asbestos Regulations 2012 (CAR)
Failure to comply with health and safety regulations can lead to severe legal consequences, such as fines, imprisonment and disqualification and put worker health and safety at risk.
By completing this course, you will not only be able to fulfil your legal responsibilities but also ensure a healthier, safer work environment for your employees.
What’s Included in the Face Fit Testing Course?
- Comprehensive yet easy-to-follow explanations
- Certificate on completion
- Simple login & user access
- The latest industry best practice
Delivery Method
Online / E-learning
Course Duration
1 Hour and 35 Mins approx
Learning Outcomes
- Understand why we need RPE and how it works
- Learn steps to perform a qualitative face fit test
- Recognise the importance of proper RPE fit for worker safety
- Know how to document and report fit test results
- Gain awareness of different types of fit testing
- Understand legislation associated with RPE
Course Content
This course contains the following modules:
Module 1: Fundamentals of RPE
Covers the basics of RPE, focusing on its importance, regulations and key concepts.
- Introduction to RPE
- Why We Need RPE
- RPE Legislation
- RPE ACOPS & Guidance
- Adequate, Suitable & Other Useful Terms
- Types of RPE
- Components of RPE
- Types of Fit Testing
Module 2: Preparing for Face Fit Testing
Prepares participants for face fit testing by detailing essential preparations and preliminary requirements.
- Understand Facial Hair Requirements
- Gather Face Fit Test Materials
- Perform a Tool Box Talk
- Perform a Sensitivity Test
- Assist with Pre-Use Checks
Module 3: Face Fit Testing Process & Post Test Actions
Outlines the face fit testing process, covering necessary steps, procedures, follow-up actions and documentation.
- Fit Testing Exercises
- Fit Test Procedure
- Re-Testing
- Post Fit Test Actions
- Completing a Fit Test Report
Module 4: Face Fit Testing Walkthrough
Provides a step-by-step walkthrough of the process, from initial preparations to completion.
- Pre- Test Actions
- Face fit test walkthrough
End of Course Assessment
At the end of the course, users must complete an assessment before earning their certification.
The end-of-course test is:
- 100% online
- Multiple choice
A score of 80% is required to pass.
Certification
Approved by IIRSM – The IIRSM-approved certificate will be available for download and printing instantly upon course completion.
Face Fit Testing certificates include the trainee’s name, company name, course name, date of completion, expiry date and name of the approval body.
Free Face Fit Testing e-Checklist
This online training course includes a free e-Checklist that walks you through the steps of a face fit test while recording.
The e-Checklist lets users record:
- Subject and equipment details
- Face fit testing procedures and results
- Retest requirements and reasons for failure
The e-Checklist is easy to use and includes a QR code system, which automatically records and stores completed forms.
Note – This offer is for one Face Fit Testing e-Checklist licence per trainee who completes this course. This e-Checklist licence is for their use and cannot be transferred or shared by other users.
Terms and conditions apply – access to this e-Checklist is for 12 months from purchase.