Occupational safety and health courses are very important to the workplace, because they ensure that all employees understand the proper procedures and safe techniques to reduce the risk of injury on the job. Most workplaces will require you to take occupational safety and health training courses which are relevant to the work that you are performing.
The information that you learn in your occupational safety and health courses is very important, so you want to make sure that you are getting the most out of it. Here are some tips to keep in mind the next time you take occupational safety and health courses at work.
Take Notes on Occupational Safety and Health Courses
Bring a notepad with you to the course and write down any important information that you think you will want to remember later. If you are a very busy person and have a lot of things going on, it can be very easy to forget a crucial piece of information unless you specifically make a note of it. Making notes can also help you to review the information later on, as during the occupational health and safety training you will be focused on taking in as much information as possible.
Listen Carefully to Your Course Instructor
Make sure that you are paying attention to the course and listening to what the instructor has to say. Turn off your phone and your laptop, so that you are not tempted to get distracted by texting or email. Lean forward in your chair and tune your ear to what the instructor is saying, as it can be very important information which can save your life.
Ask Questions
Many occupational safety and health courses will give you general safety information about performing your job, but you might encounter a particular situation that the course does not touch on. Don’t be afraid to bring up your own specific scenarios and ask questions in class. Your question might be something that everyone else is wondering but is too shy to ask and by putting it out there, you could clarify something very important.
Also, if you are confused about a specific term or description that your instructor has used, you don’t have to sit there wondering. Make sure you ask questions to clarify your confusion.
Understand the Reasons
It’s not enough to simply memorize the safety procedures without understanding the reason behind them. Many workers who don’t understand why safety rules are in place are more likely to disregard them. You might know not to use a certain chemical for a certain purpose, but not realize that this is because it is dangerously corrosive. Make sure that you fully understand the reasons behind safety procedures so that you know why you are performing them and what could happen if you don’t.
Follow Up
After the health and safety course, take your notes home and look at them again. If there are any questions that come up at this point, you can bring them up to the health and safety advisor at your workplace.
Later on, your workplace will also likely have a health and safety briefing which will go over again the most important points that were covered in the occupational safety and health courses. Make sure that you attend this important meeting so that you are kept up to date on what is happening when it comes to health and safety in your workplace.
Attending health and safety courses is a requirement within the workplace and these courses offer very valuable information that you need to know. These are just a few tips to keep in mind to get the most out of your occupational safety and health courses.
If you are going to be attending occupational safety and health courses for your job, here are some tips for getting the most out of them.